POLYMER HANDBOOK

共64个压缩卷 134M  2366页
见过牛书，没有见过这么牛的书。简直是聚合物全书，不可不看。
为了使更多的伙计们共享这本牛书，并为了囊中羞涩的伙计们下载需要，我为周6、周日下载本书并囊中羞涩的前五位伙计每人提供30个万客币协助下载,总计150个万客币。但是，使用我的万客币要争得我的同意的。仅只提供5位伙计使用我的万客币的。

This book is printed on acid-free paper. @
Copyright © 1999 by John Wiley & Sons, Inc. All rights reserved.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system
or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, scanning or otherwise, except as permitted
under Sections 107 or 108 of the 1976 United States Copyright Act,
without either the prior written permission of the Publisher, or
authorization through payment of the appropriate per-copy fee to the
Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923,
(978) 750-8400, fax (978) 750-4744. Requests to the Publisher for
permission should be addressed to the Permissions Department, John
Wiley & Sons, Inc., 605 Third Avenue, New York, NY 10158-0012, (212)
850-6011, fax (212) 850-6008, E-Mail: PERMREQ @ WILEY.COM.
Library of Congress Cataloging-in-Puhlication Data:
Polymer Handbook / Editors: J. Brandrup, E. H. Immergut, and
E. A. Grulke;
Associate Editors, A. Abe, D. R. Bloch. - 4th ed.
p. cm.
"A Wiley-Interscience Publication."
Includes index.
ISBN 0-471-16628-6 (cloth : alk. paper)
1. Polymers—Tables. 2. Polymerization—Tables. I. Brandrup, J.
II. Immergut, E. H. III. Grulke, Eric A.
QD388.P65 1999
547.7-dc21 98-37261
Printed in the United States of America.
10 9 8 7 6 5 4 3 2
Preface
The purpose of the Polymer Handbook is to bring together
the data and constants needed in theoretical and experimental
polymer research. All polymer researchers have
experienced the frustration of searching for data in the everexpanding
polymer literature and know the difficulties
involved in trying to locate a particular constant that is
buried in a long journal article. The contributors to this
Handbook have taken on the arduous task of searching the
literature and compiling the data and constants that polymer
chemists, polymer physicists, and polymer engineers are
likely to need.
The 520 and odd tables in this Handbook are divided into
eight sections. The first lists the IUPAC nomenclature rules
for polymers and the International System of Units.
Although several naming conventions exist in the technical
literature, IUPAC names permit a consistent listing of all
polymers. Section II contains data and constants needed for
polymer synthesis, kinetic mechanisms, and thermodynamic
studies of polymerization and depolymerization
reactions. Sections III and IV contain physical constants
of monomers, solvents, and oligomers. Section V lists the
physical constants of many important commercial polymers.
Section VI and VII cover the solid state properties of
polymers and the properties of polymer solutions. Section
VIII of the Handbook lists the commonly used abbreviations
or acronyms for polymers and Chemical Abstract
Registry Numbers, and gives suggestions for electronic data
searching for polymer information. This section should also
be consulted in the few cases where contributors have not
used IUPAC nomenclature.
As in the previous editions, the Polymer Handbook
concentrates on synthetic polymers, poly(saccharides) and
derivatives, and oligomers. Few data on biopolymers are
included. Spectroscopic data as well as data needed by
engineers and designers, such as mechanical and rheological
data, are minimized, since many excellent compilations
exist elsewhere. Only fundamental constants and parameters
that refer to the polymer molecule, that describe the
solid state of polymer molecules, or that describe polymer
solutions, were compiled. Constants that depend on
processing conditions or on sample history were not
emphasized, as they can be found in existing plastics
handbooks and encyclopedias.
A critical evaluation of the values published in the
literature was not attempted, since such a task would have
required an inordinate amount of time and a sizable staff.
Therefore, the users of this Handbook should consult the
original literature for details when in doubt about the
validity of any data. (The authors of the individual tables
were nevertheless requested to eliminate obviously erroneous
data from otherwise complete compilations.)
The Fourth Edition revisions have focused on data
generated in the ten years since the publication of the Third
Edition. Therefore, a completely revised Polymer Handbook
has been prepared. We have added new tables and
incorporated a large amount of new data into existing
tables. As a result, the Fourth Edition contains approximately
twenty-five percent more data, and the number of
pages has increased from about 1850 in the Third Edition to
about 2250.
We hope that this new edition will be as useful to the
polymer research community as the three earlier editions
and that many of the Polymer Handbook's previous users
will also obtain the Fourth Edition for their laboratory and
library.
The publisher plans a CD-ROM for the Polymer
Handbook in the near future. We would be grateful if our
contributors and users send us any new data they
accumulate in the course of their research, and any errors,
misprints, omissions and other flaws. We will pass on such
data to the publisher, for the polymer database, and for
future editions of this Handbook.
We would like to thank all of the contributors to the
Polymer Handbook for their help and continued patience.
The staff at John Wiley, especially Carla Fjerstad, Shirley
Thomas, and Jacqueline Kroschwitz, have provided excellent
help and support in getting all the work done. We hope
that the outstanding efforts of all these people will find due
appreciation among the users of this Handbook.
July, 1998 J. Brandrup
E. H. Immergut
E. A. Grulke
A. Abe
D. R. Bloch

[ 本帖最后由 阿波罗 于 2008-4-21 19:12 编辑 ]